Preparation of 5x M63 Minimal Medium without supplements

OVERVIEW

M63 Minimal Medium is a chemically-defined growth medium. It  can be used to culture Escherichia coli. It is prepared as a concentrated medium without supplement which is diluted to a working solution and supplemented with appropriate carbon and energy source, and some trace elements. 

A 1000 ml of 5x concentrated medium is prepared by dissolving 10 g Ammonium Sulfate {(NH4)2SO4}, 68 g Potassium Phosphate Monobasic (KH2PO4), and 2.5 mg Ferrous sulfate heptahydrate (FeSO4.7H2O) in water to a final volume of 1000 ml. Autoclaved 5x concentrated medium is quite stable and can be stored at room temperature for years. 

Working solution is prepared by diluting and supplementing the concentrated medium with MgSO4 and a carbon source e.g., sugar or glycerol. Depending on the requirements, vitamin B1, Casamino Acids, and antibiotics can also be added in the medium.

REQUIREMENTS

Reagents and solutions
Ammonium Sulfate {(NH4)2SO4, Molecular Weight:132.14)}
Potassium dihydrogen phosphate (KH2PO4, Molecular Weight: 136.09)
Ferrous sulfate heptahydrate (FeSO4.7H2O, Molecular Weight: 278.01)
Deionized water

Equipment and disposables
Measuring cylinder
Conical flask / Beaker
Magnetic stirrer

Composition of 5x M63 Medium (without supplements)
75.68 mM (NH4)2SO4
500 mM KH2PO4
0.009 mM FeSO4.7H2O

Objective
Preparation of 1000 ml of 5x M63 Medium (without supplements)

PROCEDURE

Step 1: To prepare 1000 ml of 5x M63 Minimal medium (without supplement), weigh out 10 g (NH4)2SO4, 68 g KH2PO4, and 2.5 mg FeSO4.7H2O in a 2-liter conical flask/beaker. Add 800 ml deionized/Milli-Q water. Stir until all ingredients are completely dissolved.

Tip:
◊ You can heat the solution to dissolve all solutes.

◊ One can use manual shaking using a glass pipette to mix all ingredients. Mixing using a Magnetic stirrer is optional. The magnetic stirrer makes the dissolving process easy and convenient.

Precautions:
◊ Do not dissolve in 1000 ml of deionized / Milli-Q water. It is always a good practice to dissolve all ingredients first and then adjust the volume to the desired volume with the solvent. In most cases, solution volume increases when a large amount of solute dissolves in the solvent.

◊ Make sure to dissolve any residual powder sticking to the glass.

Step 2: Adjust the volume to 1000 ml with deionized water. Mix it again.

Step 3: Transfer the medium to an autoclavable bottle. Sterilize the solution by autoclaving (20 minutes at 15 lb/sq.in. (psi) from 121-124°C on liquid cycle).

Storage
The solution can be stored at room temperature or in a cold room.

Applications
Preparation of M63 Minimal growth medium

Follow the table to prepare 5x M63 Minimal medium (without supplements) of various volumes
Ingredients/Volume100 ml250 ml500 ml1000 ml
(NH4)2SO41 g2.5 g5 g10 g 
KH2PO46.8 g17 g34 g68 g
FeSO4.7H2O0.25 mg0.625 mg1.25 mg2.5 mg
WaterTo 100 mlTo 250 mlTo 500 mlTo 1000 ml

Was this post helpful?

Author: admin

Leave a Reply

Your email address will not be published.